Introduction: The Hidden Risk in Concrete Floors – Weak Joints
Industrial concrete floors experience extreme stress at their joints—especially where slabs meet under constant forklift or heavy equipment traffic.
Without proper protection, joints can:
- Crack or chip (spalling)
- Cause machinery vibration
- Lead to costly repairs or shutdowns
- Create trip hazards
The solution? The Armour Joint System by Indus Arabia—designed to reinforce, align, and protect concrete joints under heavy loads in industrial environments across Saudi Arabia.
What is an Armour Joint System?
An Armour Joint System is a prefabricated, steel-reinforced edge protection assembly installed at construction or expansion joints in concrete slabs.
Unlike traditional joint filler, armour joints:
- Protect slab edges from impact
- Ensure perfect alignment during concrete placement
- Provide a smooth transition for forklifts
- Prevent long-term joint deterioration
It is a must-have for FM-2 floors, laser screed slabs, and high-load industrial flooring.
Key Components of Our Armour Joint System
✔ Steel Side Plates
Heavy-duty steel angles welded for impact resistance.
✔ Load Transfer Dowel Slots
Accommodates diamond plate dowels or round bars for effective slab load sharing.
✔ Permanent Anchors
Ensure the joint stays locked into the concrete with zero displacement over time.
✔ Capping & Covering
Flush with the surface, making it compatible with epoxy coatings and polishing.
Top Benefits of Armour Joint Systems
✅ 1. Prevents Edge Spalling & Cracks
Absorbs repeated impact from machinery, eliminating the common failure points around slab joints.
✅ 2. Guarantees Alignment
Ensures perfect slab alignment during installation, essential for TR-34 FM-2 flooring.
✅ 3. Increases Floor Longevity
Reduces damage, maintenance, and replacement needs, saving thousands over the floor’s life.
✅ 4. Ensures Smooth Rideability
No more forklift “bumps” or tire wear—just a seamless floor surface for optimal performance.
✅ 5. Faster & Cleaner Installation
Delivered pre-assembled and aligned, reducing site labor, mistakes, and pour delays.
Ideal Use Cases for Armour Joint Systems
✔ High-traffic warehouse floors
✔ FM-2 compliant logistics centers
✔ Cold storage & freezer slabs
✔ Manufacturing floors with AGVs
✔ Airports, ports, and distribution hubs
If your operation involves repetitive vehicle movement over joints, this system is non-negotiable.
Armour Joint System vs Traditional Joint Protection
| Feature | Armour Joint System | Traditional Joint Solution |
|---|---|---|
| Edge Protection | Steel-reinforced, high-impact | Minimal or none |
| Slab Alignment During Pour | Laser-straight guide included | Manual, prone to error |
| Load Transfer Integration | Compatible with dowels/plates | Often disconnected |
| Maintenance & Repair Needs | Very low | Frequent |
| Surface Finish Compatibility | Seamless with epoxy/polished floors | May cause cracks under coating |
How We Install Armour Joint Systems
🔧 Step 1: Pre-Pour Layout
We map out the exact joint locations based on slab design and traffic flow.
🔧 Step 2: Positioning & Anchoring
Joints are anchored to the sub-base using leveling brackets or adjustable supports.
🔧 Step 3: Concrete Pour & Screeding
Concrete is poured on both sides of the joint, using laser screeds for FM compliance.
🔧 Step 4: Final Adjustment & Surface Finishing
Armour joint is finished flush with the slab, compatible with epoxy or polished finishes.
Why Indus Arabia is the Leader in Joint Systems Across Saudi Arabia
✔ Bespoke Engineering – We supply and install custom-length armour joints per project specs.
✔ TR-34 and ASTM Compliant – All systems engineered to international industrial floor standards.
✔ Turnkey Execution – Design, supply, pour, screed, and seal—all handled by our in-house team.
✔ Extensive Local Coverage – Installed in Riyadh, Jeddah, Dammam, Jubail, and Khobar.
Frequently Asked Questions (FAQ) About Armour Joint Systems
1. What makes armour joints better than saw-cut or sealant joints?
Armour joints provide structural steel protection, preventing spalling and maintaining joint integrity over decades.
2. Do I still need dowels with armour joints?
Yes, armour joints support edge integrity, while dowels manage load transfer between slabs.
3. Are armour joints compatible with epoxy floors?
Absolutely. Our systems sit flush with the surface and accept coatings without cracking or bubbling.
4. Can they be used in cold storage and freezer slabs?
Yes—our armour joints are designed to handle thermal movement and freezer-grade durability.
5. Do armour joints slow down the pour schedule?
Not at all. In fact, our pre-fabricated systems save time by aligning joints perfectly and reducing finishing work.
Get Armour Joint Systems Installed by Indus Arabia Today
Don’t leave your floors vulnerable at their most critical point.
Protect your investment with Indus Arabia’s Armour Joint System—the gold standard for concrete joint durability in Saudi Arabia.
📍 Website: indusarabia.com.sa
📧 Email: info@indusarabia.com.sa
